What you’ll explore
Carrying a heavy bag across the room: zero work? In this lab you rank 4 actions by work done and test your intuition against a real physics simulation.
Challenge levels
- Lift it. You lift a 10 kg bag straight up by 1 m at a steady speed. How much work do you do on it, in joules? (g = 9.81 m/s²)
- Carry it. Now carry the same bag 5 m across the room at a steady speed and height. How much work does your hand do on the bag, in joules?
- Rank the jobs. Four jobs with the same 10 kg bag: lift it 1 m; carry it 5 m; drag it 5 m on the floor with a rope at 30° (μk = 0.4); push it up a smooth 20° ramp to 1 m high. Which job needs the MOST work? Type its work in joules.
- Easiest pull. Drag the bag along the floor (μk = 0.4) at a steady speed. Choose the rope angle that makes the pull as light as possible: at most 36.5 N.
- Take the ramp. What if you push the bag up a smooth 20° ramp instead of lifting it, to the same 1 m height? How much work do you do, in joules?
Key ideas
Show the explanations (spoilers: try the levels first)
- Your force (mg = 98.1 N) points the same way as the motion, so W = F·d = 98.1 N × 1 m = 98.1 J.
- Your hand pushes up with 98.1 N while the bag moves sideways. The angle between them is 90°, and cos 90° = 0, so the work is zero, even though your arm gets tired.
- Lift: 98.1 J. Carry: 0 J. Ramp: 98.1 J (smooth, so the same as lifting). Drag: the rope pulls with 36.8 N, and 36.8 N × 5 m × cos 30° ≈ 159 J, because friction takes energy the whole way.
- Pulling a little upward lifts some weight off the floor, so friction drops. Too steep and little of the pull goes forward. The best angle is where tanθ = μk: about 21.8° for μk = 0.4, with a pull of 36.4 N.
- The ramp is 2.92 m long, but you only push with 33.6 N: 33.6 N × 2.92 m = 98.1 J, the same as lifting. A smooth ramp trades force for distance; the work to raise the bag 1 m stays mgh.
About the model
- Work of each force is summed numerically as W = Σ F·Δr along the path, and checked against W = F·d·cosθ. g = 9.81 m/s².
- Steady-speed actions (lift, carry, steady drag, ramp push): the short speed-up and slow-down at the ends are ignored, so the kinetic energy is the same at start and end and the net work is 0.
- Carrying: the hand supports the weight (mg upward) while the bag moves level at constant speed; walking effort inside your body is real, but it is not work done on the bag.
- Dragging: Coulomb friction μk·N with N = mg − F sinθ (the rope lifts part of the weight); μk = 0.4 is a typical value for a fabric bag on a wooden floor. The bag never lifts off (N ≥ 0). A set pull starts from rest; if it cannot beat friction, static friction holds the bag.
- Ramp: push parallel to the ramp, smooth (μ = 0) unless set; the bag is a point mass that slides without tipping. No air resistance.
- Arrows are drawn to scale: 0.6 m per bag weight (98.1 N). Teal = your force, amber = displacement, gray = weight, red = friction. The work graph uses the same colors.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.