What you’ll explore
How high can the second hill be? In this lab you two-hill roller coaster and test your intuition against a real physics simulation.
Challenge levels
- Bottom of the drop. No friction. The cart starts at rest 20 m up. How fast is it going in the flat valley at the bottom, in m/s? (g = 9.81 m/s²)
- How high can it climb?. No friction, released from 20 m. The second hill is 30 m tall. How high up the hill does the cart get before it rolls back, in meters?
- Build the biggest thrill. No friction, released from 20 m. Build the tallest second hill the cart still gets over. At least 19 m tall.
- Set the release height. No friction. Choose the release height so the cart crosses the valley at 25 m/s (± 0.3).
- What if: add friction. What if the wheels have rolling friction μ = 0.02? It turns μ·m·g of energy into heat for every meter the cart moves sideways. Released from 20 m, how fast is it going at the middle of the valley (35 m from the start), in m/s?
Key ideas
Show the explanations (spoilers: try the levels first)
- At the bottom, all the potential energy has turned into kinetic energy: ½mv² = mgh, so v = √(2 × 9.81 × 20) ≈ 19.8 m/s. The mass cancels, so a full cart and an empty one are equally fast.
- Without friction the total energy never changes. The cart stops when all its kinetic energy has turned back into potential energy, which is at exactly the starting height: 20 m.
- Any hill lower than the 20 m start works; at 20 m the cart would crawl to a stop right on top. Real coasters keep every later hill well below the first to allow for friction.
- From ½mv² = mgh: h = v² ÷ 2g = 25² ÷ (2 × 9.81) ≈ 31.9 m. Speed grows with the square root of the height, so going 25% faster needs about 56% more height.
- Heat so far = μ·m·g × 35 m, the same as losing 0.7 m of height. So v = √(2 × 9.81 × (20 − 0.7)) ≈ 19.46 m/s. Over the whole ride those losses add up, which is why every hill must be lower than the last.
About the model
- The cart is a point mass moving along a smooth track (a sine-shaped first drop, a flat valley, a sin²-shaped second hill); g = 9.81 m/s². Motion is integrated along the arc length with RK4 (1 ms step); turning points and the valley middle are found by bisection.
- The cart is assumed to stay on the rails over the hill tops (real coasters have up-stop wheels), and the track does no work on it.
- Rolling friction (what-if levels) is modeled as μ·m·g·cosθ against the motion; the curvature (centripetal) part of the normal force and air drag are ignored, so the heat is exactly μ·m·g × horizontal distance.
- Mass (default 500 kg) only scales the energies shown; the motion is the same for any mass. The cart is drawn 1.5× larger than a real car for visibility; the speed arrow is 0.45 m per m/s.
- The cart starts at rest on the first slope; if a hill stops it, it rolls back and the run ends when it stops again on the first slope.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.