Bops Lab
Daily Lab

Conservation of energy

Bowling-ball pendulum released at your face

Bops Lab

What you’ll explore

Will the bowling ball hit your face? In this lab you bowling-ball pendulum released at your face and test your intuition against a real physics simulation.

Challenge levels

  1. Back to the start. A 7 kg ball on a 6 m rope is released from rest, touching the plate, 30° from vertical. No air, no friction. On the way back, how much higher (+) or lower (−) than its start does it rise, in cm?
  2. Speed at the bottom. Same ball, 6 m rope, released from 30°, no losses. How fast is it moving at the bottom of the swing, in m/s?
  3. Double the angle. Now release it from 60° instead of 30° (6 m rope, no losses). Speed at the bottom, in m/s?
  4. The real demo. Back to 30°, but now with real air drag and a real pivot (a little friction). How far short of the plate does the ball stop on the way back, in cm?
  5. Just a tap. With real losses, find the gentlest push (away from the plate, at release) that makes the ball come back and just tap the plate.

Key ideas

Show the explanations (spoilers: try the levels first)
  • All the energy it has is the potential energy from its starting height. At the far side and on the way back it turns around exactly when that is all potential energy again: the same height, 0 cm higher. It stops just as it touches the plate.
  • The drop from the start to the bottom is h = L(1 − cos 30°) = 6 × 0.134 = 0.80 m. Potential energy becomes kinetic: mgh = ½mv², so v = √(2gh) = √(2 × 9.81 × 0.80) ≈ 3.97 m/s. The mass cancels.
  • From 60° the ball drops h = 6 × (1 − cos 60°) = 3.0 m, almost four times as far as from 30°. Speed grows with the square root of the height: √(2 × 9.81 × 3.0) ≈ 7.67 m/s.
  • Drag and friction take about 2 J out of the swing (≈ 4% of 55 J), so the ball turns around about 3 cm lower than its start, which is about 5.5 cm short of the plate. That margin is why the demo is safe, as long as nobody pushes.
  • A push adds ½mv² of kinetic energy on top of the starting height. Just over 0.8 m/s (about 2.3 J) covers what drag and friction take out, and then the ball comes back to the plate. That is why you never push the ball in this demo.

About the model

Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.