What you’ll explore
Can you balance 3 weights on one plank? In this lab you balance a seesaw with up to three weights and test your intuition against a real physics simulation.
Challenge levels
- Where to sit. A 30 kg friend sits 1.2 m left of the pivot on a 4 m, 10 kg seesaw centered on the pivot. How far right of the pivot must a 20 kg friend sit to balance it, in m?
- What the pivot holds. The seesaw is balanced: 30 kg at 1.2 m left, 20 kg at 1.8 m right, and the plank itself is 10 kg. How hard does the pivot push up, in newtons?
- Three weights. 30 kg sits 1.4 m left and 10 kg sits 0.6 m left. Slide the 25 kg weight until the plank stays perfectly level.
- What if the plank is off-center. What if the plank is heavy (40 kg) and its middle is 0.3 m right of the pivot? With nobody else on it, how far LEFT of the pivot must a 20 kg weight sit to balance it, in m?
Key ideas
Show the explanations (spoilers: try the levels first)
- Balance means the turning effects cancel: 30 kg × 1.2 m = 20 kg × x, so x = 36 ÷ 20 = 1.8 m. The lighter friend sits farther out.
- Nothing accelerates, so the upward push equals the total weight: (30 + 20 + 10) kg × 9.81 m/s² ≈ 588.6 N.
- Left side: 30 × 1.4 + 10 × 0.6 = 48 kg·m. The 25 kg weight must make 48 kg·m on the right: x = 48 ÷ 25 = 1.92 m.
- The plank’s weight acts at its center: 40 kg × 0.3 m = 12 kg·m to the right. The 20 kg weight must cancel it: 20 × x = 12, so x = 0.6 m left.
About the model
- The plank is a uniform rigid bar on a knife-edge pivot; the weights are point masses fixed to it (they don’t slide), and the plank’s thickness is ignored, so every mass and the plank’s center lie on the line through the pivot: a balanced plank is in neutral equilibrium and stays put at any tilt.
- Net torque = g·S·cos θ with S = Σ m·x + M·c (N·m, + = right side down); the model uses it exactly: I·θ″ = g·S·cos θ with I = Σ m x² + M(L²/12 + c²).
- The plank is held level and released at t = 0 (the hand provides no vertical force), so at t = 0 the pivot push equals the total weight; once it moves, the pivot push is W − S(α cos θ − ω² sin θ). After an end touches the ground the load is shared with the ground, shown as “on ground”.
- Tipping is solved exactly via energy (½Iω² = g·S·sin θ) and a quadrature for the time; “exactly balanced” is decided in whole grams and tenths of a millimeter, so floating-point rounding can’t make a balanced plank creep.
- Weight boxes are drawn with sizes by mass for readability, not to scale; the gray arrows show each weight (mg) and the white arrow the pivot’s push, both at 2 mm per newton.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.