What you’ll explore
Why does a skater spin faster when she pulls her arms in? In this lab you pull your arms in on a spinning stool and test your intuition against a real physics simulation.
Challenge levels
- Pull them in. You spin at 60 rpm holding two 3 kg weights at 0.75 m (your body and the stool: I = 1.5 kg·m²). You pull them in to 0.15 m. How fast do you spin now, in rpm?
- Where did the energy come from?. Same pull. By what factor does your kinetic energy of rotation change (KE after ÷ KE before)?
- Hit 120 rpm. Start at 60 rpm with the weights at 0.75 m. Choose how far to pull them in so you end at 120 rpm (±3).
- A real stool. What if the stool’s bearing has friction, a steady 0.8 N·m? Same 60 rpm start and the same pull. What is your spin 4 s after you started, in rpm?
- Heavier weights. What if you hold 6 kg weights instead of 3 kg? Same 60 rpm start, pull from 0.75 m to 0.15 m. Final spin in rpm?
Key ideas
Show the explanations (spoilers: try the levels first)
- I goes from 1.5 + 2·3·0.75² = 4.875 to 1.5 + 2·3·0.15² = 1.635 kg·m². L = Iω is conserved, so ω rises by 4.875 ÷ 1.635 ≈ 2.98: about 179 rpm.
- KE = ½Iω² = L²/(2I). With L fixed, KE grows by I_before ÷ I_after ≈ 2.98. The extra energy is the work your arms did pulling the weights in against their tendency to fly outward.
- Doubling ω means halving I: 1.5 + 6r² = 2.44, so r ≈ 0.40 m. Your body’s own inertia means you can never spin faster than 60 × 4.875 ÷ 1.5 = 195 rpm, even with the weights at the axis.
- L starts at 4.875 × 2π ≈ 30.6 kg·m²/s and friction removes 0.8 each second: 27.4 after 4 s. With I = 1.635, ω = 16.8 rad/s ≈ 160 rpm. Conservation only holds when no outside torque acts.
- I goes from 1.5 + 12·0.5625 = 8.25 to 1.5 + 12·0.0225 = 1.77 kg·m²: a factor of 4.66, so about 280 rpm. Heavier weights help, but the body’s own inertia caps the gain.
About the model
- Spinning stool with a person-sized body: body + stool are one rigid part with I_body = 1.5 kg·m² (typical measured values are 1–2.5 kg·m² for an adult with arms tucked, including the stool).
- The two weights are point masses at radius r on each side; the arms themselves are treated as part of I_body (their small change of inertia is ignored).
- Arm radius follows a smooth S-curve (smoothstep) from r1 to r2 over the pull time T. The result for the final spin does not depend on how the pull is done.
- No outside torque: L = Iω is exactly conserved. Pivot-friction what-if: a constant bearing torque that removes L at a steady rate until the spin stops.
- The stool is already spinning when the clock starts (the demo begins mid-spin); this is a documented exception to "at rest before start".
- Kinetic energy is not conserved: the arms do positive work pulling the weights inward, and KE rises by I1/I2.
- The body is drawn as an abstract capsule with two rods, not a person.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.