What you’ll explore
Hot tea dissolves more sugar. Does salt care about temperature? In this lab you dissolve sugar, salt and saltpeter in cold and hot water and test your intuition against a real physics simulation.
Challenge levels
- How much sugar?. 300 g of sugar goes into 100 g of water at 20 °C and is stirred until nothing more changes. How many grams dissolve?
- Does salt care?. Saturated salt water (100 g of water with plenty of salt) is heated from 20 °C to 100 °C. How many extra grams of salt dissolve?
- Dissolve it all, coolest you can. 80 g of potassium nitrate (KNO₃) goes into 100 g of water. Choose the water temperature so it all dissolves, using no more than 50 °C.
- What if it cools?. 100 g of water at 60 °C holds 110 g of dissolved KNO₃ (saturated, no solid). It cools to 20 °C. How many grams of crystals come out?
- Warm water, less oxygen. Pond water in contact with air cools from 30 °C to 10 °C. The oxygen it can hold at 30 °C is how many times what it holds at 10 °C?
Key ideas
Show the explanations (spoilers: try the levels first)
- At 20 °C, 100 g of water holds at most about 202 g of sucrose: the solution is saturated. The other ~98 g stays as solid on the bottom no matter how long you stir. That is already twice the mass of the water, because sugar molecules bond so well to water.
- Salt goes from 35.9 g to 39.0 g per 100 g of water: only about 3 g more. For NaCl the energy cost of breaking up the crystal is almost balanced by the energy released as water surrounds the ions, so temperature barely matters.
- KNO₃ solubility climbs steeply: 63.9 g at 40 °C, 85.5 g at 50 °C per 100 g of water. 80 g fits once the water is above about 47.5 °C, so 48–50 °C works.
- At 20 °C, 100 g of water holds only 31.6 g of KNO₃. The other 110 − 31.6 = 78.4 g has to come out as crystals: this is how chemists purify solids by recrystallisation.
- Water in contact with air holds about 7.6 mg/L of oxygen at 30 °C but 11.3 mg/L at 10 °C: warm water holds only about 0.67 as much. Gas molecules escape more easily when the water is warm, which is why fish struggle in warm, still ponds.
About the model
- Solubility curves (g of solute per 100 g of water) from handbook tables every 10 °C (CRC Handbook of Chemistry and Physics; sucrose, NaCl, KNO₃), linear between table points. Dissolved oxygen for water in contact with air at 1 atm from USGS tables (mg/L, rounded).
- Dissolving is modeled as first-order: the dissolved mass approaches min(added, what the water can hold) with rate k (stirred). Real rates depend on grain size and stirring; the videos use k = 1 s⁻¹ to fit on screen.
- During a temperature change the dissolved mass relaxes toward the new equilibrium with the same rate. When cooling, the excess comes out as crystals right away: supersaturation (a solution that holds more than it should until disturbed) is not modeled.
- The volume change on dissolving is ignored; the drawn liquid level only tracks the water. Sugar at 90 °C is a thick syrup in reality; viscosity is not modeled.
- Each run uses one solute. Mixtures (salt and sugar together) interact and are not modeled.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.