What you’ll explore
How much energy is hiding in a spinning flywheel? In this lab you charge a flywheel and use it to launch a cart and test your intuition against a real physics simulation.
Challenge levels
- How much is stored?. A solid steel disc flywheel, 20 kg and 25 cm in radius, spins at 3000 rpm. How much kinetic energy does it store, in kJ?
- Twice the spin. The same flywheel now spins at 6000 rpm instead of 3000. How many times more energy does it store?
- Launch at 10 m/s. Charge the flywheel so that, after the clutch locks, the 10 kg cart leaves at 10 m/s (±0.2).
- What if it’s a rim?. Same 20 kg of steel and the same 25 cm radius, but shaped as a thin rim (all the mass at the edge), spinning at 3000 rpm. How much energy does it store, in kJ?
- Where did the energy go?. Now the clutch launches a 100 kg cart from a 10 cm drum (clutch torque 100 N·m). What percent of the flywheel’s stored energy turns into heat in the slipping clutch?
Key ideas
Show the explanations (spoilers: try the levels first)
- KE = ½·I·ω². For a solid disc I = ½·M·R² = 0.625 kg·m², and 3000 rpm = 314 rad/s, so KE = ½ × 0.625 × 314² ≈ 30.8 kJ, about the energy of a 1.2-metric ton car at 26 km/h.
- KE = ½·I·ω². Doubling ω multiplies it by 4: 30.8 kJ becomes 123 kJ. That is why energy-storage flywheels spin as fast as their material allows.
- While the clutch slips, the rope’s pull speeds the cart up and slows the flywheel. They lock when v = ω·rd, and angular momentum gives v = I·ω0·rd ÷ (I + m·rd²). For 10 m/s you need ω0 ≈ 208 rad/s ≈ 1990 rpm.
- A thin rim has I = M·R² = 1.25 kg·m², twice the solid disc, so it stores ½ × 1.25 × 314² ≈ 61.7 kJ, twice as much for the same steel.
- The cart “looks like” an inertia m·rd² = 1 kg·m² to the drum. Like a sticky collision, the lost fraction is m·rd² ÷ (I + m·rd²) = 1 ÷ 1.625 ≈ 62 %, whatever the clutch torque.
About the model
- Flywheel: 20 kg of steel, radius 25 cm. Solid disc I = ½MR² = 0.625 kg·m²; the what-if rim is a thin hoop, I = MR² = 1.25 kg·m² (a real rim has some thickness and spokes, so slightly less). Bearing friction and air drag are ignored.
- The flywheel is already spinning when the clock starts (it was charged beforehand) — the documented moving-start exception. The cart starts at rest.
- A friction clutch couples the flywheel to a drum (radius rd) whose rope pulls the cart. It slips with a constant torque τc until drum and flywheel turn together; then the hook releases and the cart coasts on a frictionless level track. The drum and rope are treated as massless.
- While slipping: cart a = τc/(m·rd), flywheel α = −τc/I. They lock at ωL = I·ω0/(I + m·rd²) (angular momentum about the axle is conserved, like a sticky collision); the clutch turns m·rd²/(I + m·rd²) of the stored energy into heat, whatever τc is.
- Drawing: the flywheel, drum and cart are drawn about 3× their real size so they can be seen next to the 8 m track, and the spin is drawn slowed down about 80× (a real flywheel at 3000 rpm is a blur). The rpm readout is the real value.
- Real-world link: Formula 1 flywheel KERS units and grid flywheel storage spin carbon-fiber rims at 30,000+ rpm in a vacuum; steel at 12,000 rpm (this lab’s maximum) would be near its bursting limit.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.