What you’ll explore
Heavier bob, faster swing? Not even close. In this lab you swing a light and a heavy bob on the same string and test your intuition against a real physics simulation.
Challenge levels
- Time the swing. A 1.00 m pendulum is released from 10°. How long is one full swing (there and back), in seconds?
- Heavy vs light. Blue has a 0.2 kg bob, amber a 2 kg bob — ten times heavier. Same 1 m string, same 10° release. How many seconds LONGER is amber’s period than blue’s? (Negative if shorter.)
- Build a seconds pendulum. Set the string length so one full swing takes exactly 2.00 s (±0.005 s), released from 5°.
- What if it swings wide?. Now release the 1 m pendulum from 60° instead of 10°. By what percent is its period longer than the textbook 2π√(L/g)?
- A four-meter pendulum. A 4.00 m pendulum is released from 10°. What is its period, in seconds?
Key ideas
Show the explanations (spoilers: try the levels first)
- T ≈ 2π√(L/g) = 2π√(1/9.81) ≈ 2.01 s. That’s why a 1 m pendulum ticks once per second each way — the old “seconds pendulum”.
- The mass cancels: more weight, but also more inertia, in exactly the same ratio. Both bobs keep perfect time together — the period depends only on length, gravity and (a little) the swing size.
- T = 2π√(L/g) → L = g·(T/2π)² ≈ 0.993 m at 5°. Grandfather clocks use exactly this: about a meter of pendulum, one tick per second.
- At 60° the period is about 7.3% longer. The textbook formula assumes sin θ ≈ θ, which is excellent below about 15° and drifts after that.
- T ∝ √L: four times the length gives √4 = 2 times the period, about 4.02 s.
About the model
- Simple pendulum: a point bob on a massless, rigid string with a frictionless pivot; no air drag, so the swing never dies down (see the damping lab).
- No small-angle approximation: the motion is the exact solution of θ″ = −(g/L)·sin θ using Jacobi elliptic functions, so wide swings correctly take longer (period = 4K(k)/√(g/L), k = sin(θ0/2)).
- Released from rest at θ0 at t = 0. The mass appears nowhere in the motion; it only sets the energy (and the bob size drawn on screen).
- A “period” is one full swing, there and back. Levels time it from the motion itself (passes through the bottom), like a stopwatch; the HUD shows it once the first full swing is complete.
- Bobs are drawn larger than a real point mass so they can be seen; their size grows with mass.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.