What you’ll explore
Double the mass. Does it bounce twice as slowly? In this lab you bounce a mass on a vertical spring and time it and test your intuition against a real physics simulation.
Challenge levels
- Time a bounce. A 0.5 kg mass hangs on a spring with k = 20 N/m. Pull it down 8 cm and let go. How long is one full bounce (the period), in seconds?
- Double the mass. Blue carries 0.5 kg, amber 1.0 kg, on identical springs. How many times longer is amber’s bounce than blue’s?
- One-second bounce. The mass is 0.8 kg. Pick the spring stiffness so one bounce takes 1.00 s (±0.02 s).
- Pull it further. What if you pull amber down twice as far (16 cm instead of 8 cm)? Same mass, same spring. How many times longer is its bounce?
- Where it hangs. Before any bouncing, how far (in m) does the spring (k = 20 N/m) stretch beyond its free length when the 0.5 kg mass just hangs still? The bounce is centered there.
Key ideas
Show the explanations (spoilers: try the levels first)
- T = 2π√(m/k) = 2π√(0.5 / 20) ≈ 0.99 s. Heavier masses are harder to speed up; stiffer springs push back harder.
- T ∝ √m, so doubling the mass multiplies the period by √2 ≈ 1.41 (0.99 s → 1.40 s). To double the period you need four times the mass.
- Rearrange T = 2π√(m/k): k = 4π²m / T² = 4π² × 0.8 / 1² ≈ 31.6 N/m. A stiffer spring makes the bounce quicker.
- The restoring force grows in proportion to the stretch, so a bigger swing is also a faster swing. The period T = 2π√(m/k) does not depend on how far you pull it (as long as the spring stays ideal).
- At rest the spring force balances the weight: k·s = m·g, so s = 0.5 × 9.81 / 20 ≈ 0.245 m. The mass then bounces symmetrically about that point, and gravity never changes the period.
About the model
- Ideal massless spring obeying Hooke’s law (F = k·stretch) with 0.30 m free length; no damping and no air drag, so the bounce never dies down. Real springs lose a little energy every cycle (see the damping lab).
- Each mass is released from rest after being pulled down by A below its hanging point; motion is x(t) = A·cos(ωt) with ω = √(k/m), exact at every time step.
- The period T = 2π√(m/k) does not depend on the pull A or on g; gravity only shifts where the mass hangs (m·g/k). The spring’s own mass is ignored (a real spring adds about a third of its mass to m).
- “Offset” in the HUD is the distance below the hanging point (positive = below). Levels time the period from the motion itself (zero crossings), like a stopwatch.
- Masses are drawn as blocks whose size grows with mass; the spring coil is drawn to the real stretch.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.