What you’ll explore
Your tire lost air overnight? Maybe not. In this lab you why a tire reads low on a cold morning and test your intuition against a real physics simulation.
Challenge levels
- Double the Celsius?. A sealed, rigid box of air is heated from 20 °C (blue) to 40 °C (amber). By what factor does its (absolute) pressure go up?
- Double the kelvin. Now heat the box from 300 K to 600 K (27 °C to 327 °C). By what factor does the pressure go up?
- Cold morning. You fill a tire to 32 psi on the gauge on a 20 °C afternoon. Overnight it cools to −10 °C, with no leak. What does the gauge read in the morning, in psi?
- Hot highway. The same tire (32 psi at 20 °C) heats up on a long drive. Find the tire temperature that makes the gauge read 35 psi (± 0.3).
- How much slower?. Back to the cold morning: 20 °C (blue) vs −10 °C (amber). How fast are the cold molecules compared with the warm ones? (Ratio of RMS speeds.)
Key ideas
Show the explanations (spoilers: try the levels first)
- Pressure is proportional to absolute temperature: P₂/P₁ = T₂/T₁ = (40 + 273.15) / (20 + 273.15) = 313.15 / 293.15 ≈ 1.07. The molecules hit the walls a bit faster and a bit more often.
- Double the absolute temperature and the pressure doubles (Gay-Lussac’s law, P/T = constant at fixed volume). Speed only rises by √2, but pressure counts both how hard and how often molecules hit: √2 × √2 = 2.
- Absolute pressure = 32 + 14.7 = 46.7 psi. Scale by the absolute temperatures: 46.7 × 263.15 / 293.15 = 41.9 psi absolute, so the gauge reads 41.9 − 14.7 ≈ 27.2 psi. The tire “lost” almost 5 psi without losing a single molecule.
- Absolute pressures: 46.7 psi → 49.7 psi is a factor of 1.064, so the absolute temperature rises by the same factor: 293 K × 1.064 ≈ 312 K ≈ 39 °C. That is why tire pressures are set cold.
- Average kinetic energy is (3/2)kT, so v_rms = √(3kT/m) ∝ √T: √(263.15/293.15) ≈ 0.947. Only 5% slower, yet the pressure drops 10%, because slower molecules hit both softer and less often.
About the model
- Ideal gas: point molecules (air, 29 u) that never hit each other, only the walls, elastically. Real air molecules collide constantly, which changes their paths but not the average pressure, so P = NkT/V holds either way at these densities.
- The box is a 15.6 nm cube holding 300 molecules at the real density of air in a 32 psi tire at 20 °C (the fill sets the volume: P·V = N·k·T). Heating or cooling happens at fixed volume (a rigid, sealed box); a real tire bulges a little, which the model ignores.
- Gauge pressure = absolute pressure − 1 atm (14.7 psi). Gas laws use absolute pressure and absolute temperature (kelvin); the level answers depend on that.
- Each box’s velocities are one fixed random set, rescaled so the average kinetic energy is exactly (3/2)kT. With no collisions the speeds never change, so the speed spread is illustrative rather than an exact Maxwell distribution.
- The gauge on the HUD uses the pressure from the molecules’ speeds, (1/3V)Σmv² = NkT/V. The graph shows the pressure the walls actually feel (momentum per hit × hits ÷ time ÷ area), which wobbles at first and settles on the same value.
- Molecules are already moving at t = 0 (thermal motion is the point), an exception to the at-rest rule; the HUD hides pressures until the clock starts. Molecules are drawn about 1.5× their real size (0.36 nm) so they are visible.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.