What you’ll explore
In a solid, are the atoms standing still? In this lab you heat a box of atoms: solid, liquid, gas and test your intuition against a real physics simulation.
Challenge levels
- Is a solid still?. Solid argon at 20 K (−253 °C). The crystal keeps its shape. What is the atoms’ RMS speed, in m/s? (In this flat model each atom moves in 2 directions.)
- Double the temperature. At 20 K each argon atom has 1.72 meV of motion energy on average. Heat the crystal to 40 K. How much motion energy per atom now, in meV?
- Melt it, don’t boil it. Choose a temperature that melts the crystal (average crystal order below 0.60) but doesn’t boil it: at least 60% of the atoms must stay packed together (3+ close neighbors). Averages are taken over the last 40% of the run.
- What if the atoms are heavier?. Swap argon (40 u) for atoms 4× heavier (160 u, like xenon) at the same 20 K. What is their RMS speed, in m/s?
Key ideas
Show the explanations (spoilers: try the levels first)
- Temperature IS the jiggling. With two directions of motion, ½m⟨v²⟩ = kT, so v_rms = √(2kT/m) = √(2 × 1.38×10⁻²³ × 20 / 6.63×10⁻²⁶) ≈ 91 m/s. The atoms just can’t get past their neighbors, so they vibrate in place (about 0.03 nm).
- Average motion energy per atom = kT (two directions × ½kT). Double the absolute temperature and you double it: 1.72 → 3.45 meV. The speed only rises by √2 ≈ 1.41×.
- Around 55–65 K the atoms shake hard enough to slip past their neighbors: the six-fold crystal pattern breaks up but they still cling together as a liquid drop. A little hotter and atoms start escaping into the gas. (This flat 2D argon melts lower than real argon, 84 K, and its liquid range is narrow.)
- At equal temperature every kind of atom has the same average kinetic energy kT. With ½mv² fixed, 4× the mass means v drops by √4 = 2: about 46 m/s instead of 91 m/s.
About the model
- Flat (2D) molecular dynamics of 91 argon atoms interacting through the Lennard-Jones force (σ = 0.34 nm, ε/k = 119.8 K, m = 39.95 u), cut off at 2.5 σ; velocity-Verlet on a fixed 10.8 fs step. A 3D crystal behaves the same way qualitatively, but numbers differ.
- Because the model is 2D, each atom has 2 directions of motion: average kinetic energy per atom = kT and v_rms = √(2kT/m). In 3D these are (3/2)kT and √(3kT/m) (112 m/s for argon at 20 K instead of 91 m/s).
- Temperature is held by an isokinetic thermostat (velocities rescaled every step to the exact target). Real heat flow is slower and temperature fluctuates; the checks also run the model without a thermostat (energy conserved to 0.1%).
- 2D argon melts and boils at lower temperatures than real argon (84 K melting, 87 K boiling), and a small cluster melts lower than bulk; the liquid range here (≈ 55–65 K) is narrow, and a fast heating ramp melts later (superheating, ≈ 65–70 K in the videos). The box (≈ 6 nm) has hard elastic walls; there is no gravity.
- Atoms are already moving at t = 0 (thermal motion is the point of the lab), an exception to the at-rest rule. The HUD hides values until the clock starts. Atoms are drawn as spheres about half their spacing wide; color shows speed (blue slow → amber fast).
- “Crystal order” is the average local six-fold order |ψ6| (1 = perfect hexagonal crystal); “packed” = atoms with at least 3 neighbors within 1.5 σ; the melt level uses both.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.