What you’ll explore
Halve the volume. What happens to the pressure? In this lab you squeeze a sealed syringe, then dive with a balloon and test your intuition against a real physics simulation.
Challenge levels
- Halve the volume. A sealed syringe holds 60 mL of air at 101.3 kPa. Push the plunger slowly to 30 mL (the temperature stays the same). What is the pressure now, in kPa?
- Balloon at 20 m. A sealed balloon holds air at the sea surface (101.3 kPa). A diver takes it down to 20 m in sea water. What fraction of its surface volume is it now?
- Hit 300 kPa. Start with 60 mL at 101.3 kPa. Choose where to stop the plunger so the gas ends at 300 kPa (± 5 kPa).
- How much work?. Squeeze 60 mL of air at 101.3 kPa slowly down to 20 mL. How much work does the plunger do on the gas, in J?
- Where does it halve?. Take the balloon from the surface down to 40 m of sea water. At what depth is it exactly half its surface size, in m?
Key ideas
Show the explanations (spoilers: try the levels first)
- At constant temperature P·V stays the same (Boyle’s law). Half the volume → twice the pressure: 101.3 × 60 ÷ 30 ≈ 202.7 kPa.
- Every 10 m of sea water adds about one atmosphere. At 20 m the air is at about 3 atm, so it shrinks to about 1/3 of its surface size (0.335).
- P·V is fixed at 101.3 × 60. For 300 kPa the volume must be 101.3 × 60 ÷ 300 ≈ 20.3 mL: about a third of where you started.
- The force grows as you squeeze, so add up P·dV along the way: W = P₀V₀·ln(V₀/V) = 101,325 Pa × 60×10⁻⁶ m³ × ln 3 ≈ 6.68 J. At constant temperature it all leaves the gas as heat.
- Half size means double pressure: the water must add one atmosphere, ρ·g·d = 101,325 Pa, so d = 101,325 ÷ (1025 × 9.81) ≈ 10.1 m. The biggest squeeze happens in the first 10 m.
About the model
- Ideal gas at constant temperature (isothermal): P·V = n·R·T with n and T fixed. The plunger moves slowly enough that the air stays at room temperature (a fast squeeze would warm it and push P higher).
- Pressures are absolute (101.325 kPa at the surface), not gauge pressures. The syringe is leak-free and the plunger frictionless.
- Work on the gas W = −∫P dV = P₀V₀·ln(V₀/V); at constant temperature the internal energy doesn’t change, so the same energy leaves as heat.
- Balloon dive: the balloon is slack (its rubber adds no pressure), sea water is 1025 kg/m³ with g = 9.81 m/s², and the air inside stays at the surface temperature. Real water gets colder with depth, which shrinks the air a little more.
- The molecules drawn inside are an illustration: their number and speed are fixed (same temperature) and they don’t collide with each other. Only the box they fill changes, so the same molecules hit the walls more often.
- Volumes can’t go below 1 mL in the sim (the gas can’t be squeezed to nothing).
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.