What you’ll explore
Molecules move at hundreds of m/s. Why does a smell take so long to cross a room? In this lab you drop dye into still water and watch it spread and test your intuition against a real physics simulation.
Challenge levels
- Twice the time. A drop of dye spreads in still water at 20 °C. Compare the mean squared distance from the start ⟨r²⟩ after 2 minutes with after 1 minute. How many times bigger is it?
- What if it has to go twice as far?. The dye’s typical distance reaches 0.2 mm after a while. How many times longer does it take to reach 0.4 mm?
- Warm it up. Choose the water temperature so the dye’s typical distance reaches at least 0.35 mm within 60 s.
- Perfume across a room. Perfume in perfectly still air (D ≈ 1×10⁻⁵ m²/s, 20 °C). The molecules fly at hundreds of m/s. How many DAYS until the typical distance reaches 5 m, by diffusion alone?
- What if the molecule is bigger?. A small dye molecule (0.5 nm) reaches a typical distance of 0.2 mm in about 23 s at 20 °C. How many seconds does a molecule twice as big (1.0 nm) take?
Key ideas
Show the explanations (spoilers: try the levels first)
- Each molecule takes a random step after every collision. The steps don’t add up in a line; their squares do. So ⟨r²⟩ = 4Dt grows exactly like t: twice the time gives twice ⟨r²⟩ (and only √2 ≈ 1.41× the typical distance).
- Typical distance R = √(4Dt), so the time to reach a distance x is x²/(4D). Double x and the time goes up by 4: about 23 s for 0.2 mm, 93 s for 0.4 mm.
- Warmer water is less viscous and its molecules hit harder, so D = kT/(6πηr) rises: from 4.3×10⁻¹⁰ m²/s at 20 °C to 5.6×10⁻¹⁰ at 30 °C. You need D ≥ 5.1×10⁻¹⁰ m²/s, which takes about 27 °C or warmer.
- t = x²/(4D) = 25/(4 × 10⁻⁵) ≈ 6.3×10⁵ s ≈ 7 days. In a real room you smell perfume within minutes because air currents (convection) carry it; diffusion alone is far too slow over meters.
- Stokes–Einstein: D = kT/(6πηr). Double the radius and D halves, so the time x²/(4D) doubles: about 23 s becomes 47 s.
About the model
- Each tracer molecule does a random walk on a fixed grid of 400 steps per run: every step it moves by an independent uniform random amount in x and in y whose variance is 2Dτ, so the cloud’s mean squared distance grows as ⟨r²⟩ = 4Dt (2D). Real molecules take ~10¹⁰ tiny steps per second; the statistics (Gaussian cloud, ⟨r²⟩ ∝ t) are the same.
- The dye spreads in a thin layer seen from above, so the spread is 2D; in 3D the typical distance is √(6Dt), √1.5 ≈ 1.22× larger. “Typical distance” is the RMS distance from the start, √⟨r²⟩.
- Water: D from the Stokes–Einstein relation D = kT/(6πηr) with a dye molecule radius of 0.5 nm and water’s viscosity from the Vogel equation (1.00 mPa·s at 20 °C). Air: D ≈ 1×10⁻⁵ m²/s at 20 °C for a small perfume molecule, scaled as T^1.75; molecule size is not varied in air.
- Still fluid only: no convection, stirring or air currents. In a real room air movement carries a smell in minutes; diffusion alone would take about a week to cover 5 m.
- The molecule speed shown is the RMS thermal speed √(3kT/m) for a 500 u dye (water) or a 150 u perfume molecule (air).
- Every run is time-compressed to 12 s on screen (seconds of water time, or days of still-air time); the HUD shows the real time. Molecules are drawn as dots much larger than real molecules.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.