What you’ll explore
Why do locked wheels stop you slower? In this lab you locked-wheel vs. ABS braking and test your intuition against a real physics simulation.
Challenge levels
- Wheels locked. Dry road, 25 m/s (90 km/h). The wheels lock and the car skids (μk = 0.7). How far does it slide before stopping, in m?
- What ABS buys you. Same car, same 25 m/s, but ABS keeps the tires rolling at peak grip (μs = 0.9). How many meters shorter is the ABS stop than the locked skid?
- How long it takes. With ABS on the dry road (μs = 0.9), how many seconds does the car take to stop from 25 m/s?
- Wet road, 40 m to stop. The road is wet (ABS grip μs = 0.6). There is 40 m to the crossing. Set the highest speed from which the ABS car still stops in time (within 1.5 m of the line).
- What if: twice as fast. What if you brake from 50 m/s instead of 25 m/s, wheels locked on the dry road? How far does the skid go now, in m?
Key ideas
Show the explanations (spoilers: try the levels first)
- Friction decelerates the car at μk·g = 0.7 × 9.81 ≈ 6.87 m/s². Distance = v² ÷ (2a) = 25² ÷ 13.7 ≈ 45.5 m.
- ABS stops in 25² ÷ (2 × 0.9 × 9.81) ≈ 35.4 m, the skid takes ≈ 45.5 m: about 10 m shorter, roughly two car lengths.
- The speed falls at a steady a = μs·g ≈ 8.83 m/s², so t = v ÷ a = 25 ÷ 8.83 ≈ 2.83 s.
- d = v² ÷ (2μg) → v = √(2 × 0.6 × 9.81 × 40) ≈ 21.7 m/s (78 km/h). Any faster and the car reaches the crossing still moving.
- d = v² ÷ (2μg): doubling v multiplies d by 4. 4 × 45.5 ≈ 182 m. Twice the speed also means four times the kinetic energy for friction to remove.
About the model
- Friction model: a real tire’s grip depends on how much it slips (the slip curve). Here it is simplified to two values: peak static grip μs while rolling (ABS) and kinetic grip μk while sliding (locked).
- Values: dry asphalt μs = 0.9, μk = 0.7; wet asphalt μs = 0.6, μk = 0.45 (typical textbook/tire-test ranges). g = 9.81 m/s².
- Braking starts at t = 0 at the line with the car already moving at v0 (reaction time is not modeled). Deceleration is constant (μg) until the car stops; air drag and rolling resistance are ignored.
- Distance does not depend on mass (friction and inertia both scale with m); the 1,500 kg mass is only used for the force and energy readouts.
- ABS’s other big benefit, keeping steering control, is not modeled; this lab is only about stopping distance.
- Car bodies are abstract blocks drawn 1.5× size; the two lanes run side by side so both stops can be compared.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.