What you’ll explore
Truck vs car: who feels the bigger force? In this lab you a truck hits a car and test your intuition against a real physics simulation.
Challenge levels
- Who pushes harder?. A 12,000 kg truck at 15 m/s hits a parked 1,500 kg car. At the peak of the crash, the force on the car is how many times the force on the truck?
- Who feels it more?. Same crash. The force is equal on both. How many times bigger is the car’s peak acceleration than the truck’s?
- Where does the car go?. The crash is a bit bouncy (restitution e = 0.2). The car starts at rest. How fast is the car moving right after the crash, in m/s?
- Momentum handed over. In that crash the truck loses 24,000 kg·m/s of momentum. How much momentum does the car gain, in thousands of kg·m/s?
- Heavier car. Same truck at 15 m/s, e = 0.2. Choose the car’s mass so the car’s change in speed is 14 m/s (±0.1).
Key ideas
Show the explanations (spoilers: try the levels first)
- Newton’s 3rd law: the truck pushes the car with force F, and the car pushes the truck back with exactly −F, at every instant. The two force graphs are mirror images, so the ratio is 1.
- Same force, a = F/m. The car has 1/8 of the truck’s mass, so it gets 8× the acceleration: about 27 g for the car against 3.4 g for the truck. That is what “who feels it more” really means.
- Total momentum before: 12,000 × 15 = 180,000 kg·m/s, and it is the same after. With e = 0.2 they separate at 0.2 × 15 = 3 m/s: truck 13 m/s, car 16 m/s.
- Equal and opposite forces act for exactly the same time, so the impulses are equal and opposite: the car gains exactly the 24,000 kg·m/s the truck loses. Total momentum never changes.
- The car’s change in speed is mA(1 + e)(vA − vB) / (mA + mB). A heavier car changes speed less: about 3,430 kg gives 14 m/s. The force pair is still equal and opposite.
About the model
- 1D crash on a straight road; no friction, braking, rotation or bouncing off the road during the ~1 s shown.
- Contact force = a smooth "haversine" crash pulse F(s) = F₀·sin²(πs/T_c), the pulse shape used for crash-test sleds: it starts and ends at zero and never pulls. F₀ is set so the impulse is μ(1 + e)u, so momentum is conserved exactly and the vehicles separate at e × the closing speed.
- The same force acts on both vehicles with opposite signs at every instant (Newton’s 3rd law); accelerations are F/m. The peak-force level measures each force independently from that vehicle’s own m·Δv/Δt.
- Default crash: truck 12,000 kg at 15 m/s (54 km/h) into a parked 1,500 kg car, restitution e = 0.2 (typical of car crashes), contact 120 ms → 400 kN peak, car ≈ 27 g, truck ≈ 3.4 g.
- Crush: the overlap left at separation, uT_c(1 − e)/2 (0.72 m by default), is drawn as permanent deformation split evenly between the two vehicles.
- Blue = vehicle A (the truck by default), amber = vehicle B (the car). Vehicles are abstract blocks (crash-test-lab look), drawn truck-sized from 3,500 kg and car-sized below; no people are shown. Force arrows are drawn to the same scale on both bodies; acceleration arrows are scaled to the car’s peak.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.