What you’ll explore
The first half drains faster than the second. How much faster? In this lab you drain a tank of water through a small hole and test your intuition against a real physics simulation.
Challenge levels
- How long to empty?. A 30 cm wide tank holds 50 cm of water. You pull the plug on a 1 cm hole at the bottom. How long until it is empty, in seconds? (Water leaves at √(2gh), g = 9.81 m/s².)
- The top half. Same tank. What percentage of the total drain time does it take for the water to fall from 50 cm to 25 cm (the top half)?
- Empty in one minute. Same 30 cm tank with 50 cm of water. Choose the hole size so it empties in 60 s (±2.5 s).
- What if: twice as much water. The 50 cm tank took about 287 s. Fill it to 1.0 m instead (same tank, same 1 cm hole). How long does it take to empty now, in seconds?
- The shrinking jet. The hole is 40 cm above the floor. When the water has fallen to a quarter of its starting depth, the jet lands closer to the tank. How far does it reach now, as a fraction of its reach at the start?
Key ideas
Show the explanations (spoilers: try the levels first)
- Area ratio (30 cm / 1 cm)² = 900. At the start the jet is √(2 × 9.81 × 0.5) = 3.13 m/s, but it slows as the level falls. Solving A·dh/dt = −a√(2gh) gives T = (A/a)·√(2h₀/g) = 900 × 0.319 s ≈ 287 s: exactly twice the "constant speed" guess.
- √h falls at a steady rate: √h = √h₀ − kt. Half height means √h = √h₀/√2, reached at T·(1 − 1/√2) ≈ 29 % of the time. The bottom half takes the other 71 %.
- Drain time scales with the area ratio (D/d)². Going from 287 s to 60 s needs a hole √(287/60) ≈ 2.19 times wider: about 21.9 mm.
- T = (A/a)·√(2h₀/g) grows like √h₀. Doubling the depth multiplies the time by √2 ≈ 1.41: about 406 s, not 575 s.
- The jet leaves at √(2gh) and falls for √(2y/g), so it lands 2√(h·y) away. A quarter of the depth → √¼ = ½ the reach.
About the model
- Torricelli draining: water leaves the hole at v = √(2gh), h = water depth above the hole (Bernoulli with a still surface and a small hole). With A·dh/dt = −a·√(2gh) the depth follows h(t) = (√h₀ − kt)², k = (a/A)√(g/2), and the tank empties at T = (A/a)·√(2h₀/g).
- The hole is ideal by default (discharge coefficient Cd = 1). Real sharp-edged holes have Cd ≈ 0.61 (the jet contracts), which makes every time 1/0.61 ≈ 1.6× longer; the sandbox has a Cd slider. Viscosity, surface tension and the last few millimeters (where the simple law breaks down) are ignored.
- The hole is capped at half the tank diameter: Torricelli’s law needs the hole to be small compared with the tank.
- The hole is plugged until the clock starts (t = 0). The hole sits at the bottom of the tank, which stands on a stand; the jet flies as a projectile without air resistance and lands 2√(h·y) from the wall (y = hole height).
- Runs play at a steady fast-forward rate (videos about 24×); the HUD time is real time.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.