What you’ll explore
Heavy things sink. So why does a steel ship float? In this lab you drop wood, ice, steel and a steel hull into water and test your intuition against a real physics simulation.
Challenge levels
- Tip of the iceberg. A block of ice (917 kg/m³) floats in fresh water. What percentage of its height ends up under the water?
- A steel hull. Steel is 7.85× denser than water. A sealed steel hull 1.2 m × 0.6 m × 0.4 m tall, with 6 mm walls, is lowered in. What percentage of its height ends up under water? (Type 100 if it sinks.)
- Just sinks. Make the hull walls thicker until it just sinks. Find the thinnest wall that sinks it (within 1 mm of the limit).
- What if it’s the sea?. What if the same ice floats in sea water (1025 kg/m³) instead? What percentage of its height is under water now?
Key ideas
Show the explanations (spoilers: try the levels first)
- A floating object sinks until it pushes aside its own weight of water. The fraction under water equals its density ÷ the water’s: 917 ÷ 1000 = 91.7%. Only 8.3% sticks out.
- The hull’s mass is 7850 × steel volume ≈ 133 kg, spread over an outside volume of 0.288 m³: an average density of about 462 kg/m³. So it floats with 462 ÷ 1000 ≈ 46% of its height under water.
- It floats while its average density is below 1000 kg/m³. That needs the steel volume to reach 1000 × 0.288 ÷ 7850 ≈ 0.0367 m³, which happens at walls of about 13.3 mm. Just past that, the hull sinks — slowly, because it is only slightly denser than water.
- Fraction under = 917 ÷ 1025 ≈ 89.5%. Sea water is denser, so less of it has to be pushed aside to hold the same weight: things float a little higher in the sea.
About the model
- Objects are sealed boxes released from rest with their bottoms just touching still water in a 2.5 m deep tank; they only move up and down (no tilting, no rolling over, no waves drawn).
- Buoyancy is Archimedes’ principle: ρ_water × g × submerged volume, for a box whose sides stay vertical. A floating object settles with m ÷ (ρ_water·A) of its bottom under water, so the fraction under = average density ÷ water density.
- Densities: wood-like block 600 kg/m³ (adjustable), ice 917, steel 7850, fresh water 1000, sea water 1025. The steel hull is a closed 1.2 × 0.6 × 0.4 m box with all six walls the same thickness; the air inside is ignored (≈ 0.35 kg).
- Water resistance is modeled simply: a surface damping term (damping ratio 0.6) while the object is partly under, plus quadratic drag (C_d 1.05) whenever it is wet, and an added mass of 0.25·ρ·A·min(L, W) for the water that moves with it. These set how fast things bob and sink, not where they float.
- A real hull that is only slightly denser than water sinks very slowly, as here; real ships also flood through openings, which this sealed model does not include.
- Blue/amber/teal/gray = lanes A–D. Arrows: buoyancy up (blue), weight down (amber), both drawn to the same scale per object.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.