What you’ll explore
Yank the tablecloth. Do the plates stay? In this lab you the tablecloth pull and test your intuition against a real physics simulation.
Challenge levels
- The sharp yank. You yank the cloth at 50 m/s² (a sharp tug). The plate starts 30 cm from the edge. How far does the plate move, in cm?
- The gentle pull. Now pull gently, at 2 m/s². How far does the plate move before it stops or reaches the edge, in cm?
- The gentlest save. Find a gentle pull that still works: the plate must end at least 5 cm from the edge, using no more than 9 m/s².
- The heavy dish. Same 50 m/s² yank, but a 2 kg serving dish instead of a 0.4 kg plate. How far does the dish move, in cm?
- Deep in the cloth. The plate sits 60 cm from the edge with 60 cm of cloth behind it. Pick a pull that leaves it on the table, at least 20 cm from the edge.
Key ideas
Show the explanations (spoilers: try the levels first)
- The cloth is gone in about 0.11 s. Friction (μk·g ≈ 2.5 m/s²) only gets the plate to 0.28 m/s in that time, so it slides about 1.5 cm on the cloth and 1 cm more on the table: ≈ 2.5 cm in total.
- Static friction can give the plate up to μs·g ≈ 2.94 m/s². A 2 m/s² pull never beats it, so plate and cloth move together: 30 cm, straight off the edge.
- Plate travel = μk·g·L·(1 + μk/μt) ÷ (a − μk·g). Setting it to 25 cm gives a ≈ 7.2 m/s². Any harder pull works too; the plate moves less the harder you pull.
- Friction = μk·m·g and a = F/m = μk·g: mass cancels. The heavy dish moves the same 2.5 cm as the light plate.
- More cloth to pull out means more time for friction to act. With L = 0.6 m and at most 0.4 m of travel: a ≥ μk·g + μk·g·L·(1 + μk/μt) ÷ 0.4 m ≈ 8.4 m/s².
About the model
- Friction values are typical estimates: cotton cloth on glazed ceramic μs ≈ 0.30, μk ≈ 0.25; ceramic on a bare wooden table μk ≈ 0.40. Real values vary with the cloth, the glaze and moisture.
- The cloth is pulled horizontally with constant acceleration until its trailing end passes under the plate. Real yanks are neither perfectly constant nor horizontal; a real trick also needs a hemless cloth.
- The plate is a rigid body that slides without tipping or rocking; no air drag. It "falls" when its center reaches the table edge.
- Positions are updated with exact constant-acceleration formulas and every event (cloth leaves, plate stops, plate reaches the edge) is solved exactly, so results do not depend on the time step.
- In the view, the cloth drapes over the edge as it is pulled; the plate is drawn tipping when it falls. Arrows: plate velocity at 0.3 m per m/s.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.