What you’ll explore
Launched vs dropped: which hits the ground first? In this lab you launched ball vs. dropped ball and test your intuition against a real physics simulation.
Challenge levels
- Which lands first?. From a 20 m tower, one ball is launched sideways at 20 m/s while another is dropped at the same moment. How many seconds AFTER the dropped ball does the launched ball land?
- How long in the air?. The launched ball leaves the 20 m tower at 15 m/s. How long does it take to reach the ground, in seconds? (g = 9.81 m/s²)
- How far out?. Same launch: 15 m/s from 20 m. How far from the base of the tower does it land, in meters?
- Hit the zone. From 20 m, choose the launch speed so the ball lands between 40 m and 42 m from the base.
- Raise the tower. The launch speed is stuck at 10 m/s. Choose the tower height so the ball lands 30 m out (±0.5 m).
Key ideas
Show the explanations (spoilers: try the levels first)
- They land at the same time (0 s apart). Gravity only changes the vertical motion, and both start with zero vertical speed at the same height.
- Use only the vertical motion: 20 = ½ · 9.81 · t², so t = √(40 / 9.81) ≈ 2.02 s — the same as a dropped ball.
- Horizontal speed never changes (no air resistance), so x = 15 m/s × 2.02 s ≈ 30.3 m.
- Time in the air is fixed by the height (2.02 s), so speed = distance ÷ time: about 41 ÷ 2.02 ≈ 20.3 m/s.
- To go 30 m at 10 m/s the ball must fly 3 s, and falling for 3 s takes h = ½ · 9.81 · 3² ≈ 44 m. Range grows with √h: double the distance needs four times the height.
About the model
- Two identical balls leave the same height at t = 0: one with horizontal speed v₀, one from rest. Constant g (default 9.81 m/s²).
- No air resistance. For a real fast projectile, drag matters a lot and the ground is only flat over a short range; both are ignored here on purpose.
- Positions are updated with the exact constant-acceleration formulas, so results do not depend on the time step; impact is solved exactly at y = 0.
- Heights are measured to the ball’s center; the ball is drawn sitting on the tower top at t = 0 and on the ground at landing. Before the clock starts both balls are held still.
- Equal-time dots are placed every 0.2 s (or every 1/20 of the fall for long falls); velocity arrows are drawn to scale with the scene.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.