What you’ll explore
Does the catalyst get used up? In this lab you decompose hydrogen peroxide with and without a catalyst and test your intuition against a real physics simulation.
Challenge levels
- Is the catalyst used up?. You add 8 iodide ions (the catalyst) to hydrogen peroxide and let it fizz until 99 % of the oxygen is out. How many catalyst particles are left at the end?
- How much faster?. Without a catalyst the activation energy is 75 kJ/mol; with iodide it is 58 kJ/mol. At 25 °C (298 K), how many times faster does the catalysed flask start releasing oxygen? (Arrhenius: rate ∝ e^(−Ea/RT), R = 8.314 J/(mol·K).)
- Done in a minute. Pick a catalyst by its activation energy so the flask releases 99 % of its oxygen in about a minute (45–75 s) at 25 °C.
- What if: does the catalyst change ΔH?. Without a catalyst, decomposing H₂O₂ releases 98 kJ per mole (ΔH = −98 kJ/mol). What is ΔH per mole of H₂O₂ with the iodide catalyst, in kJ/mol?
- How much oxygen?. 100 mL of 3 % hydrogen peroxide (3 g of H₂O₂) decomposes completely: 2 H₂O₂ → 2 H₂O + O₂. How many liters of oxygen gas is that at 25 °C and 1 atm?
Key ideas
Show the explanations (spoilers: try the levels first)
- All 8. Iodide takes part in the reaction (H₂O₂ + I⁻ → H₂O + IO⁻), but the second step (H₂O₂ + IO⁻ → H₂O + O₂ + I⁻) returns it. A catalyst opens a faster route and comes out unchanged, so a pinch can decompose a whole bottle.
- Ratio = e^((75 − 58)·1000 / (8.314 × 298)) = e^6.86 ≈ 950. Lowering the barrier by 17 kJ/mol lets about 950 times more molecular collisions get over it every second.
- The flask is 99 % done at t = ln(100)/k. For 60 s you need k ≈ 0.077 s⁻¹, which with this pre-exponential factor means Ea ≈ 56 kJ/mol. Each extra kJ/mol makes it about 1.5 times slower.
- Still −98 kJ/mol. ΔH depends only on where you start (H₂O₂) and end (H₂O + O₂); Hess’s law adds the two catalysed steps to exactly the same total. The catalyst lowers the barrier in between, not the drop.
- 3 g ÷ 34.01 g/mol = 0.0882 mol H₂O₂ → 0.0441 mol O₂. As a gas: V = nRT/P = 0.0441 × 8.314 × 298 / 101325 ≈ 1.08 L, ten times the volume of the liquid.
About the model
- Reaction 2 H₂O₂ → 2 H₂O + O₂, first order in H₂O₂: n(t) = n₀·e^(−kt), k = A·e^(−Ea/RT) (Arrhenius). Everything is closed form in time.
- Activation energies are approximate textbook values: ≈ 75 kJ/mol uncatalysed and ≈ 56–58 kJ/mol with iodide (reported values vary with conditions). Both flasks use the same pre-exponential factor A, so the speed-up is exactly e^((Ea − Ea_cat)/RT) ≈ 950× at 25 °C.
- A is chosen so the catalysed flask has a 20 s half-life, a watchable demo. Real rates depend on the iodide concentration, and real 3 % peroxide without a catalyst lasts months (it also contains stabilisers). The times are illustrative; the ratio and the chemistry are the point.
- Mechanism shown: H₂O₂ + I⁻ → H₂O + IO⁻, then H₂O₂ + IO⁻ → H₂O + O₂ + I⁻. The share of catalyst particles shown as IO⁻ follows the reaction rate (a picture of the cycle, not a kinetic simulation of the intermediate); the total number never changes.
- ΔH from standard enthalpies of formation: H₂O₂(l) −187.78, H₂O(l) −285.83 kJ/mol → −98.05 kJ per mol H₂O₂ (−196.1 per 2 mol). The split between the two catalysed steps in the energy diagram is illustrative; their sum is fixed (Hess’s law).
- Oxygen volume is an ideal gas at the flask temperature and 1 atm, with no oxygen dissolved in the liquid. "3 %" means 3 g of H₂O₂ per 100 mL.
- In the "elephant toothpaste" demo, dish soap traps the oxygen as foam; the foam here is schematic and its height follows the oxygen made.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.