What you’ll explore
Which car is actually accelerating faster? In this lab you two cars accelerate; compare v–t graphs and test your intuition against a real physics simulation.
Challenge levels
- Read the slope. The blue car goes from 0 to 27 m/s (about 60 mph) in 9 s. What is its acceleration, in m/s²?
- Faster ≠ accelerating faster. Blue starts at 20 m/s and ends at 25 m/s. Amber starts from rest and ends at 15 m/s. Both take 5 s. How much larger is amber’s acceleration than blue’s, in m/s²? (Negative if blue’s is larger.)
- Area = distance. Amber’s v–t line goes from 5 m/s at t = 0 to 29 m/s at t = 6 s. How far does amber travel in those 6 s, in meters?
- Catch up in speed. Blue does 0–60 mph in 8 s (3.35 m/s²) from rest. Amber is already rolling at 6 m/s. Set amber’s acceleration so both cars have the same speed at t = 6 s (within 0.2 m/s).
- When does blue pass?. Amber cruises off at 12 m/s and accelerates at 1 m/s². Blue starts from rest at 4 m/s². Choose how long the race lasts so that blue is ahead (or level) at the end.
Key ideas
Show the explanations (spoilers: try the levels first)
- Acceleration = change in speed ÷ time = 27 m/s ÷ 9 s = 3 m/s². On the v–t graph that is the slope of the line.
- Blue gains 5 m/s in 5 s: 1 m/s². Amber gains 15 m/s in 5 s: 3 m/s². Amber is slower at the end but accelerating 2 m/s² faster; its v–t line is steeper.
- Distance is the area under the v–t line: a trapezoid, (5 + 29) ÷ 2 × 6 = 102 m. Same as x = v₀t + ½at² = 30 + 72.
- Blue reaches 3.35 × 6 ≈ 20.1 m/s. Amber needs to gain 20.1 − 6 = 14.1 m/s in 6 s: about 2.35 m/s². Same end speed, different slopes and different starting points.
- Positions: blue 2T², amber 12T + 0.5T². They are level when 1.5T² = 12T, at T = 8 s. The bigger acceleration always wins in the end, even from behind.
About the model
- Each car has a constant acceleration for the whole run (real cars accelerate less as speed rises; gear changes are ignored). The run ends at time T and the cars freeze there.
- A car may start already moving (v₀ > 0): v(0) = v₀ is its speed as the clock starts (a flying start).
- HUD acceleration is the measured Δv/Δt since the start, i.e. the slope of the v–t line; it reads "—" at t = 0.
- Positions are integrated exactly for constant acceleration per step; the checks confirm x equals the area under v–t by independent numeric integration.
- The road view follows the cars; lane dashes every 10 m and cross-lines every 50 m show motion. Car bodies are abstract blocks drawn 1.5× size for visibility; velocity arrows are 0.5 m per 1 m/s.
Every number on screen comes from the simulation, and each lab passes automated checks against the physics formulas. Spotted a mistake? Tell us.